AudioCodes Mediant 4000 SBC User Manual

CHAPTER60 Configuration Parameters Reference
Mediant 4000 SBC | User's Manual
Auxiliary and Configuration File Name Parameters
The table below lists the parameters associated with the Auxiliary files. For more information on
Auxiliary files, see Loading Auxiliary Files.
Table 60-7: Auxiliary and Configuration File Parameters
Parameter Description
General Parameters
[SetDefaultOnIniFileProcess] Determines if all the device's parameters are set to their
defaults before processing the updated ini file.
■ [0] = Disable - parameters not included in the downloaded
ini file are not returned to default settings (i.e., retain their
current settings).
■ [1] = Enable (default).
Note: The parameter is applicable only for automatic HTTP
update or Web ini file upload (not applicable if the ini file is
loaded using BootP).
[SaveConfiguration] Determines if the device's configuration (parameters and
files) is saved to flash (non-volatile memory).
■ [0] = Configuration isn't saved to flash memory.
■ [1] = (Default) Configuration is saved to flash memory.
Auxiliary Filename Parameters
'Call Progress Tones File'
[CallProgressTonesFilename]
Defines the name of the file containing the Call Progress
Tones definitions.
For the ini file, the name must be enclosed by single
apostrophes, for example, 'cpt_us.dat'.
For more information on how to create and load this file, refer
to DConvert Utility User's Guide.
Note: For the parameter to take effect, a device reset is
required.
'Prerecorded Tones File'
[PrerecordedTonesFileName]
Defines the name of the file containing the Prerecorded
Tones.
Note:
■ For the parameter to take effect, a device reset is
required.
'Dial Plan File'
[DialPlanFileName]
Defines the name of the Dial Plan file.
For the ini file, the name must be enclosed by single
apostrophes, for example, 'dial_plan.dat'.
Note: This parameter is used only for backward
compatibility. For loading (importing) Dial Plan files, use the
Dial Plan table instead (see Importing Dial Plans on
page468).
[UserInfoFileName] Defines the name of the file containing the User Information
data.
- 875 -

AudioCodes Mediant 4000 SBC Specifications

General

Brand	AudioCodes
Model	Mediant 4000 SBC
Category	Controller
Language	English