AudioCodes Mediant 4000 SBC - Configuring SBC Routing Policy Rules

CHAPTER25 Routing SBC
Mediant 4000 SBC | User's Manual
2. Click New; the following dialog box appears:
3. Configure a SIP response code for alternative routing according to the parameters described in
the table below.
4. Click Apply.
Table 25-3: Alternative Routing Reasons Table Parameter Descriptions
Parameter Description
'Index'
[SBCAlternativeRoutingReasons_
Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'Name'
alt-res-name
[SBCAlternativeRoutingReasons_
AltReasonName]
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters.
Note: Each row must be configured with a unique name.
'Release Cause'
rel-cause
[SBCAlternativeRoutingReasons_
ReleaseCause]
Defines a SIP response code that triggers the device's
alternative routing mechanism.
[4] 4xx; [5] 5xx; [6] 6xx; [400] Bad Request; [402] 402
Payment Required; [403] Forbidden; [404] Not
Found; [405] Method Not Allowed; [406] Not
Acceptable; [408] Request Timeout (Default); [409]
Conflict; [410] Gone; [413] Request Too Large; [414]
Request URI Too Long; [415] Unsupported Media;
[420] Bad Extension; [421] Extension Required; [423]
Session Interval Too Small; [480] Unavailable; [481]
Transaction Not Exist; [482] Loop Detected; [483]
Too Many Hops; [484] Address Incomplete; [485]
Ambiguous; [486] Busy; [487] Request Terminated;
[488] Not Acceptable Here; [491] Request Pending;
[493] Undecipherable; [500] Internal Error; [501] Not
Implemented; [502] Bad Gateway; [503] Service
Unavailable; [504] Server Timeout; [505] Version Not
Supported; [513] Message Too Large; [600] Busy
Everywhere; [603] Decline; [604] Does Not Exist
Anywhere; [606] Not Acceptable; [805] Admission
Failure; [806] Media Limits Exceeded; [818]
Signalling Limits Exceeded.
Configuring SBC Routing Policy Rules
The Routing Policies table lets you configure up to 250 Routing Policy rules. A Routing Policy
determines the routing and manipulation (inbound and outbound) rules per SRD in a multiple SRD
configuration topology. The Routing Policy also configures the following:
- 568 -