AudioCodes Mediant 4000 SBC - 3 Default IP Address

CHAPTER3 Default IP Address
Mediant 4000 SBC | User's Manual
3 Default IP Address
The device is shipped with a factory default networking address for operations, administration,
maintenance, and provisioning (OAMP), through its LAN interface, as shown in the table below.
You can use this address to initially access the device from any of its management tools
(embedded Web server, OVOC, or Telnet/SSH). You can also access the device through the
console CLI, by connecting the device's serial (RS-232) port to a PC.
Table 3-1: Default VoIP LAN IP Address for OAMP
IP Address Value
IP Address 192.168.0.2 (assigned to the first Ethernet Port Group - top-left
ports 1 and 2)
Prefix Length 24 (255.255.255.0)
Default Gateway 0.0.0.0
VLAN 1
Ethernet Group / Port GROUP_1 / GE_1 or GE_2
- 9 -