AudioCodes Mediant 4000 SBC - Viewing Certificate Information

CHAPTER14 Security
Mediant 4000 SBC | User's Manual
● The certificate replacement process can be repeated whenever necessary (e.g.,
when the new certificate expires).
● You can also load the certificate through the device's Automatic Provisioning
mechanism, using the [HTTPSCertFileName] parameter.
Viewing Certificate Information
You can view information of TLS certificates installed on the device per TLS Context.
➢ To view certificate information:
1. Open the TLS Contexts table (see Configuring TLS Certificate Contexts).
2. Select a TLS Context row, and then click the Certificate Information link located below the
table; the Certificate Information page appears:
- 130 -