AudioCodes Mediant 4000 SBC - Page 162

CHAPTER14 Security
Mediant 4000 SBC | User's Manual
4. Click the Create CSR button; a textual certificate signing request is displayed in the area
below the button:
5. Copy the text and send it to your security provider (CA) to sign this request.
6. When the CA sends you a server certificate, save the certificate to a file (e.g., cert.txt). Make
sure that the file is a plain-text file containing the "BEGIN CERTIFICATE" header.
7. Scroll down to the Upload Certificates Files From Your Computer group, click the Browse
button corresponding to the 'Send Device Certificate...' field, navigate to the cert.txt file, and
then click Load File:
8. After the certificate successfully loads to the device, save the configuration with a device
reset.
9. Verify that the private key is correct:
a. Open the TLS Contexts table.
b. Select the required TLS Context row.
c. Click the Certificate Information link located below the table.
d. Make sure that the 'Status' field displays "OK"; otherwise, consult with your security
administrator:
- 129 -