CHAPTER52 Syslog and Debug Recording
Mediant 4000 SBC | User's Manual
Message Item Description
The syntax of the BID is as follows:
[BID=<last 6 characters in MAC>:<number of times device has reset>]
For example:
14:32:52.062: 10.33.8.70: WARNING: [S=9399]
[BID=2ed1c8:96] invalid Physical index
Where:
■ 2ed1c8 is the device's MAC address.
■ 96 is the number of times the device has reset.
Message Body Describes the message.
Timestamp When the Network Time Protocol (NTP) is enabled, a timestamp string
[hour:minutes:seconds] is added to all Syslog messages.
Event Representation in Syslog Messages
The Syslog message events that the device sends are denoted by unique abbreviations. The
following example shows an abbreviated event in a Syslog message indicating packet loss (PL):
Apr 4 12:00:12 172.30.1.14 PL:5 [Code:3a002] [CID:3294] [Time: 20:17:00]
The table below lists the unique event abbreviations:
Table 52-4: Syslog Error Name Descriptions
Error Abbreviation Error Name Description
AA Invalid Accumulated Packets Counter
AC Invalid Channel ID
AL Invalid Header Length
AO Invalid Codec Type
AP Unknown Aggregation Payload Type
AR Invalid Routing Flag Received
AT Simple Aggregation Packets Lost
CC Command Checksum Error
CE Invalid Cell Coder Code
CS Command Sequence Error
ES 8 sec Timeout Before Disconnect
HO Host Received Overrun
IA Invalid AMR Payload
- 820 -
To Next Page
Loading...
