AudioCodes Mediant 4000 SBC - Page 252

CHAPTER16 Services
Mediant 4000 SBC | User's Manual
Parameter Description
■ Each row must be configured with a unique name.
■ The parameter value cannot contain a forward slash (/).
'Type'
server-type
[LdapServerGroups_
ServerType]
Defines whether the servers in the group are used for SIP-
related LDAP queries (Control) or management login
authentication-related LDAP queries (Management).
■ [0] Control (default)
■ [1] Management
■ [2] Management Service
For more information on the different optional LDAP services,
see LDAP-based Management and SIP Services on
page215.
Note: Only one LDAP Server Group can be defined for
management.
'Server Search Method'
server-search-method
[LdapServerGroups_
SearchMethod]
Defines the method for querying between the two LDAP
servers in the group.
■ [0] Parallel = (Default) The device queries the LDAP
servers at the same time.
■ [1] Sequential = The device first queries one of the LDAP
servers and if the DN object is not found or the search
fails, it queries the second LDAP server.
'DN Search Method'
search-dn-method
[LdapServerGroups_
SearchDnsMethod]
Defines the method for querying the Distinguished Name
(DN) objects within each LDAP server.
■ [0] Sequential = (Default) The query is done in each DN
object, one by one, until a result is returned. For example,
a search for the DN object record "JohnD" is first run in
DN object "Marketing" and if a result is not found, it
searches in "Sales", and if not found, it searches in
"Administration", and so on.
■ [1] Parallel = The query is done in all DN objects at the
same time. For example, a search for the DN object
record "JohnD" is done at the same time in the
"Marketing", "Sales" and "Administration" DN objects.
Cache
'Cache Entry Timeout'
cache-entry-timeout
[LdapServersGroups_
CacheEntryTimeout]
Defines the duration (in minutes) that an entry in the device's
LDAP cache is valid. If the timeout expires, the cached entry
is used only if there is no connectivity with the LDAP server.
The valid range is 0 to 35791. The default is 1200. If set to 0,
the LDAP entry is always valid.
'Cache Entry Removal
Timeout'
cache-entry-removal-
timeout
[LdapServerGroups_
CacheEntryRemovalTimeout]
Defines the duration (in hours) after which the LDAP entry is
deleted from the device's LDAP cache.
The valid range is 0 to 596. The default is 0 (i.e., the entry is
never deleted).
- 219 -