AudioCodes Mediant 4000 SBC - Page 312

CHAPTER16 Services
Mediant 4000 SBC | User's Manual
3. Configure an OVOC Service according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Table 16-27:OVOC Services Table Parameter Descriptions
Parameter Description
General
'Index'
[OVOCService_Index]
Defines an index number for the new table row.
Note:
■ Each row must be configured with a unique index.
■ The parameter is mandatory.
'Name'
service-name
[OVOCService_
ServiceName]
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 40 characters. By default, no
value is defined.
Note:
■ Each row must be configured with a unique name.
■ The parameter is mandatory.
Device
'Device Login Interface'
device-login-
interface
[OVOCService_
DeviceLoginInterface]
Assigns an IP network interface (local, listening HTTP
interface:port) for communication with the client. To configure IP
Interfaces, see Configuring IP Network Interfaces on page96.
By default, no value is defined.
Note:
■ The parameter is mandatory.
■ The NGINX directive for this parameter is "proxy_bind".
'Device Login Port'
device-login-port
[OVOCService_
DeviceLoginPort]
Defines the login port of the requesting client.
Note: The NGINX directive for this parameter is "proxy_bind".
'Device Scheme'
device-scheme
[OVOCService_
DeviceScheme]
Defines the protocol for communication with the requesting
client.
■ [0] HTTP (default)
■ [1] HTTPS
- 279 -