AudioCodes Mediant 4000 SBC - Page 414

CHAPTER18 Core Entities
Mediant 4000 SBC | User's Manual
Item # Description
1. Click the Add SIP Interface plus icon. The icon appears next to existing SIP
Interfaces, or as when no SIP Interfaces exist on a topo-
logy border, or as when there are no SIP Interfaces at all.
The SIP Interfaces table opens with a new dialog box for adding a SIP Interface
to the next available index row.
2. Configure the SIP Interface as desired, and then click Apply; the SIP Interfaces
table closes and you are returned to the Topology View, displaying the new SIP
Interface.
For more information on configuring SIP Interfaces, see Configuring SIP Interfaces.
3 Configured Media Realms. Each Media Realm is displayed using the following
"Media Realm"-titled icon, which includes the name and row index number:
If you hover your mouse over the icon, a pop-up appears displaying the following
basic information (example):
If you click the icon, a drop-down menu appears listing the following commands:
■ Edit: Opens a dialog box in the Media Realms table to modify the Media Realm.
■ Show List: Opens the Media Realms table.
■ Delete: Opens the Media Realms table where you are prompted to confirm
deletion of the Media Realm.
To add a Media Realm, do the following:
1. Click the Add Media Realm plus icon. The icon appears next to existing
Media Realms, or as when no Media Realms exist on a
topology border, or as when there are no Media Realms at
all.
The Media Realms table opens with a new dialog box for adding a Media Realm
to the next available index row.
2. Configure the Media Realm as desired, and then click Apply; the Media Realms
table closes and you are returned to the Topology View, displaying the new
Media Realm.
For more information on configuring Media Realms, see Configuring Media Realms.
- 381 -