AudioCodes Mediant 4000 SBC - Page 416

CHAPTER18 Core Entities
Mediant 4000 SBC | User's Manual
Item # Description
■ To support the connectivity status feature, you must enable the keep-alive
mechanism for the Proxy Set that is associated with the IP Group (see
Configuring Proxy Sets).
■ The green-color state also applies to scenarios where the device rejects calls
with the IP Group due to low QoE (e.g., low MOS), despite connectivity.
5 Links to Web pages relating to commonly required SBC configuration:
■ Classification: Opens the Classification table where you can configure
Classification rules (see Configuring Classification Rules).
■ Number Manipulation: Opens the Outbound Manipulations table where you can
configure manipulation rules on SIP Request-URI user parts (source or
destination) or calling names in outbound SIP dialog requests (see Configuring
IP-to-IP Outbound Manipulations).
■ Routing: Opens the IP-to-IP Routing table where you can configure IP-to-IP
routing rules (see Configuring SBC IP-to-IP Routing Rules).
■ SBC Settings: Opens the SBC General Settings page where you can configure
miscellaneous settings.
- 383 -