CHAPTER19 Coders and Profiles
Mediant 4000 SBC | User's Manual
7. Configure coders for the Allowed Audio Coders Group according to the parameters described in
the table below.
8. Click Apply.
Table 19-3: Allowed Audio Coders Groups and Allowed Audio Coders Tables Parameter Descriptions
Parameter Description
Allowed Audio Coders Groups Table
'Index'
allowed-audio-coders-
groups <index>
[AllowedAudioCodersGroups_
Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique
index.
'Name'
coders-group-name
[AllowedAudioCodersGroups_
Name]
Defines a descriptive name, which is used when
associating the row in other tables.
The valid value is a string of up to 40 characters.
Note:
■ Each row must be configured with a unique name.
■ The parameter value cannot contain a forward slash
(/).
Allowed Audio Coders Table
'Index'
allowed-audio-coders
<group index/coder index>
[AllowedAudioCoders_
AllowedAudioCodersIndex]
Defines an index number for the new table row.
Note: Each row must be configured with a unique
index.
'Coder'
coder
[AllowedAudioCoders_CoderID]
Selects a coder from the list of coders.
Note: Each coder can be configured only once per
Allowed Audio Coders Group.
'User-defined Coder'
user-define-coder
[AllowedAudioCoders_
UserDefineCoder]
Defines a user-defined coder.
The valid value is a string of up to 24 characters (case-
insensitive). For example, "HD.123" (without quotes).
Note: Each coder can be configured only once per
Allowed Audio Coders Group.
- 392 -
To Next Page
Loading...
