CHAPTER19 Coders and Profiles
Mediant 4000 SBC | User's Manual
Parameter Description
To play user-defined tones, you need to record your tones
and then install them on the device using a loadable
Prerecorded Tones (PRT) file, which is created using
AudioCodes DConvert utility. When you create the PRT
file, each recorded tone file must be added to the PRT file
with the tone type "acUserDefineTone<Index>". When you
want to specify the held tone for this parameter, use the
index number. For more information, see Prerecorded
Tones File.
- 434 -
To Next Page
Loading...
