AudioCodes Mediant 4000 SBC - Page 608

CHAPTER25 Routing SBC
Mediant 4000 SBC | User's Manual
6. Click New; the following dialog box appears:
7. Configure IP Group Set members according to the parameters described in the table below.
8. Click Apply, and then save your settings to flash memory.
Table 25-6: IP Group Set Member Table Parameter Descriptions
Parameter Description
'Index'
index
[IPGroupSetMember_
IPGroupSetMemberIndex]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'IP Group'
ip-group-name
[IPGroupSetMember_
IPGroupName]
Assigns an IP Group to the IP Group Set.
To configure IP Groups, see Configuring IP Groups.
Note: The IP Group can only be a Server-type or Gateway-type.
'Weight'
weight
[IPGroupSetMember_
Weight]
Defines the weight of the IP Group. The higher the weight, the
more chance of the IP Group being selected as the destination
of the call.
The valid value is 1 to 9. The default is 1.
Note: The parameter is applicable only if you configure the
'Policy' parameter to Random Weight.
- 575 -