CHAPTER27 Configuring Malicious Signatures
Mediant 4000 SBC | User's Manual
➢ To configure a Malicious Signature:
1. Open the Malicious Signature table (Setup menu > Signaling & Media tab > SBC folder >
Malicious Signature).
2. Click New; the following dialog box appears:
3. Configure a Malicious Signature according to the parameters described in the table below.
4. Click Apply.
Table 27-1: Malicious Signature Table Parameter Descriptions
Parameter Description
'Index'
[ConditionTable_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'Name'
name
[MaliciousSignatureDB_
Name]
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 30 characters.
Note: Each row must be configured with a unique name.
'Pattern'
pattern
[MaliciousSignatureDB_
Pattern]
Defines the signature pattern.
The valid value is a string of up to 60 characters. You can use the
built-in syntax editor to help you configure the field. Click the
Editor button located alongside the field to open the Editor, and
then simply follow the on-screen instructions.
Note: The parameter is mandatory.
- 592 -
To Next Page
Loading...
