AudioCodes Mediant 4000 SBC - Page 667

CHAPTER31 HA Overview
Mediant 4000 SBC | User's Manual
➢ To define a name for the device:
1. Open the HA Settings page (Setup menu > IP Network tab > Core Entities folder > HA
Settings).
2. In the 'HA Device Name' field, enter a name for the active device.
3. In the 'Redundant HA Device Name' field, enter a name for the redundant device.
4. Click Apply.
Once the devices are running in HA mode, you can change the name of the redundant
device through the active device only, in the 'Redundant HA Device Name' field.
- 634 -