AudioCodes Mediant 4000 SBC - Page 733

CHAPTER40 Automatic Provisioning
Mediant 4000 SBC | User's Manual
2. Define the URL address of the provisioning server on which the files (specified in Step 1) are
located for download, using the TemplateUrl parameter. When you configure the URL, you
must include the file type placeholder, "<FILE>", which represents the file name. For each file
type specified in Step 1, the device sends an HTTP request to the server, where the
placeholder in the URL is replaced with the filename and extension, as listed in the below table.
For example, if you configure the AupdFilesList parameter as in Step 1 and the TemplateUrl
parameter to:
● ini File:
TemplateUrl = 'http://10.8.8.20/Site1_<FILE>'
● CLI:
# configure system
(config-system)# automatic update
(automatic-update)# template-url http://10.8.8.20/Site1_<FILE>
The device sends HTTP requests to the following URLs:
● http://10.8.8.20/Site1_device.ini
● http://10.8.8.20/Site1_fk.ini
● http://10.8.8.20/Site1_cpt.data
3. Place the files to download on the provisioning server. Make sure that their file names and
extensions are based on the hardcoded string values specific to the file type for the <FILE>
placeholder (e.g., "Site1_device.ini" for the ini file), as shown in the table below.
Table 40-1: File Template Keywords and Placeholder Values per File Type
File Type
Keywords for
Template File
Value Replacing
<FILE> Placeholder
ini file ini device.ini
CLI Script file cli cliScript.txt
CLI Startup Script file clis cliStartupScript.txt
CMP file based on timestamp acmp autoFirmware.cmp
User Information file usrinf userInfo.txt
CMP file cmp firmware.cmp
License Key file fk fk.ini
Call Progress Tone (CPT) file cpt cpt.dat
Prerecorded Tones (PRT) file prt prt.dat
Dial Plan file dpln dialPlan.dat
Answering Machine Detection
(AMD) file
amd amd.dat
SSL/TLS Private Key file sslp pkey.pem
pkey<ID>.pem (for multi-
certificate system)
- 700 -