EasyManua.ls Logo

AudioCodes Mediant 4000 SBC - Page 792

AudioCodes Mediant 4000 SBC
1037 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Metric Parameter Description
LocalID - Local ID - identifies the reporting endpoint for the
media session
RemoteID - Remote ID - identifies the remote endpoint of the
media session
OrigID - Originating ID - Identifies the endpoint which originated
the session
LocalAddr - Local Address - IP address, port, and SSRC of the
endpoint/UA which is the receiving end of the stream
being measured
RemoteAddr - Remote Address - IP address, port, and SSRC of the
the source of the stream being measured
LocalGroup - Local Group ID - identification for the purposes of
aggregation for the local endpoint
RemoteGroup - Remote Group ID - identification for the purposes of
aggregation for the remote endpoint
LocalMAC - Media Access Control (MAC) address of the local SIP
device
Timestamps START Start time of the media session.
STOP End time of the media session.
SessionDesc PT Payload Type - 'payload type' parameter in the RTP
packets (i.e., the codec).
PD Payload Description - description of the codec
SR Sample Rate - rate at which the voice was sampled
FD Frame Duration (msec) - packetization rate
FO Frame Octets - number of octets in each frame per
RTP packet
FPP Frames per Packets - number of frames per RTP
packet
PLC Packet Loss Concealment - indicates whether a PLC
algorithm was used for the session ("0" - unspecified;
"1" - disabled; "2" - enhanced; "3" - standard)
SSUP Silence Suppression State - indicates whether silence
suppression, also known as Voice Activity Detection
(VAD) is enabled ("on" or "off")
- 759 -

Table of Contents

Other manuals for AudioCodes Mediant 4000 SBC

Related product manuals