AudioCodes Mediant 4000 SBC - Page 812

CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Field Description
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "InPackets" for Syslog and Local Storage, and
empty for RADIUS (ACCT_INPUT_PACKETS).
■ The maximum number of characters for Syslog tabular alignment is 10.
Local Jitter
[610]
Displays the RTP jitter. The field is an integer from 0 to 40000 samples (-1 if
unavailable).
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "RTPjitter".
■ The maximum number of characters for Syslog tabular alignment is 9.
Local MOS
CQ
[627]
Displays the local MOS for conversation quality. The field is an integer from 10
to 46 (127 if information is unavailable).
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "LocalMosCQ".
■ The maximum number of characters for Syslog tabular alignment is 10.
Local Output
Octets
[607]
Displays the local output octets (bytes).
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is empty for RADIUS (ACCT_OUTPUT_ OCTETS
standard ID 43).
■ The maximum number of characters for Syslog tabular alignment is 10.
Local Output
Packets
[605]
Displays the number of packets sent by the device. The field is an integer from
0 to 0XFFFFFFFF.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "OutPackets" for Syslog and Local Storage, and
empty for RADIUS (ACCT_OUTPUT_PACKETS standard ID 48).
- 779 -