AudioCodes Mediant 4000 SBC - Page 834

CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
3. Configure the CDR according to the parameters described in the table below.
4. Click Apply.
Examples of configured CDR customization rules are shown below:
Table 51-3: SBC CDR Format Table Parameter Descriptions
Parameter Description
'Index'
[SBCCDRFormat_
Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'CDR Type'
cdr-type
[SBCCDRFormat_
CDRType]
Defines the application type for which you want to customize CDRs.
■ [1] Syslog SBC = (Default) Customizes CDR fields for SIP
signaling-related CDRs sent in Syslog messages.
■ [3] Syslog Media = Customizes CDR fields for media-related CDRs
sent in Syslog messages.
■ [5] Local Storage SBC = Customizes CDR fields that are stored
locally on the device. Only signaling-related CDRs are stored locally
on the device.
■ [7] RADIUS SBC = Customizes CDR fields (i.e., RADIUS
Attributes) for CDRs sent in RADIUS accounting request
messages.
■ [11] JSON SBC = Customizes CDR fields for SIP signaling-related
CDRs that are sent in JSON format to the REST server using the
device's REST API.
'Field Type'
col-type
[SBCCDRFormat_
FieldType]
Defines the CDR field (column) that you want to customize. The
applicable CDR field depends on the settings of the 'CDR Type'
parameter:
- 801 -