AudioCodes Mediant 4000 SBC - Page 915

CHAPTER60 Configuration Parameters Reference
Mediant 4000 SBC | User's Manual
Parameter Description
tls-root-cert
[TLSRootFileUrl]
Defines the name of the TLS trusted root certificate file and
the URL address of the server where the file is located.
Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
Note: For the parameter to take effect, a device reset is
required.
tls-cert
[TLSCertFileUrl]
Defines the name of the TLS certificate file and the URL
address of the server where the file is located. Optionally, the
username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
Note: For the parameter to take effect, a device reset is
required.
tls-private-key
[TLSPkeyFileUrl]
Defines the URL address of the server on which the TLS
private key file is located. Optionally, the username and
password ('https://username:password@10.1.1.1/<file
name>') for access authentication with the server can also be
configured.
sbc-user-info
[SBCUserInfoFileUrl]
Defines the name of the SBC User Information file and the
URL address (IP address or FQDN) of the server where the
file is located. Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
For example:
'https://www.company.com/SBC-User-Info.csv'.
user-info
[UserInfoFileURL]
Defines the name of the User Information file and the URL
address (IP address or FQDN) of the server where the file is
located. Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
The maximum length of the URL address is 99 characters. For
example:
http://server_name/file, https://server_name/file
Note: The parameter is used for backward compatibility
only. Use the [SBCUserInfoFileUrl] parameter (above)
instead.
feature-key
[FeatureKeyURL]
Defines the name of the License Key file and the URL address
of the server where the file is located. Optionally, the
username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
- 882 -