AudioCodes MSBR Series User Manual

CHAPTER1 Introduction
MSBR | SNMP Alarms
Trap Varbind Description
AudioCodes OVOC provides the proper string
value when it sends it northbound.
acBoardTrapGlobalsDeviceDescription
(15)
Device description.
The value is an octet string of up to 100
characters.
Note: The device sends an empty string "\0".
AudioCodes OVOC provides the proper string
value when it sends it northbound.
acBoardTrapGlobalsSystemSerialNumber
(16)
The Serial Number of the device that sent the
trap.
The value is an octet string of up to 255
characters.
Customizing Trap's Enterprise OID
You can change the enterprise value in the device's SNMP Traps to a variable value, using the
ini file parameter [SNMPTrapEnterpriseOid]. This parameter replaces the Traps’ OID prefix from
'AcTrap' (1.3.6.1.4.1.5003.9.10.1.21) to user-defined root. All other OIDs remain the same.
For example, the current acBoardEvBoardStarted parameter's OID is
'1.3.6.1.4.1.5003.9.10.1.21.2.0.4'. Its prefix ('1.3.6.1.4.1.5003.9.10.1.21') can be changed, and all
other OIDs remain the same.
SNMP Alarms in Syslog
SNMP alarms are sent to the Syslog server using the following format.
■ Sent alarms: RAISE-ALARM: <Alarm Name>; Textual Description: <Textual Description>;
Severity <Alarm Severity>; Source <Alarm Source>; Unique ID: <Alarm Unique ID >.
If additional information exists in the alarm, the following are also added: Additional Info1:/
Additional Info2:/ Additional Info3
The message severity is as follows:
Table 1-2: Message Severity
ITU Perceived Severity (SNMP Alarm’s Severity)
AudioCodes' Syslog
Severity
Critical RecoverableMsg
Major RecoverableMsg
- 8 -

AudioCodes MSBR Series Specifications

General

Brand	AudioCodes
Model	MSBR Series
Category	Security System
Language	English