Need help?Do you have a question about the AudioCodes MSBR Series and is the answer not in the manual?
General| Brand | AudioCodes |
|---|---|
| Model | MSBR Series |
| Category | Security System |
| Language | English |
Describes the system's ability to manage alarms reliably, considering network and EMS outages.
Provides a general understanding of SNMP traps sent by the device for alarms and events.
Details the variables associated with proprietary SNMP traps and their meanings for alarm data.
Covers alarms related to digital trunk interfaces, including LOS, LOF, and AIS conditions.
Indicates a loss of signal on the near-end of a trunk interface, suggesting a physical connection issue.
Signals a loss of frame on the near-end of a trunk interface, often related to framing or line code configuration.
Alarms pertaining to hardware components or boards within the device, indicating various operational failures.
Reports a critical error on a device board, requiring immediate attention and potential support contact.
Notifies when the device has been reset, either intentionally or due to an error condition.
Alerts when all proxy servers in a set are offline, impacting call routing and availability.
Indicates a failure in the device's controller or its ability to manage specific functions like proxy registration or server connection.
Alarms related to the device's license management, including errors or invalid license states.
Reports an issue with the device's feature key, preventing specific functionalities from operating.
Group of alarms related to network connectivity and service status, such as link failures or server unavailability.
Signals that an Ethernet link on the device has gone down, disrupting network connectivity.
Indicates a loss of connection or communication issue with the Network Time Protocol (NTP) server.
Alarms monitoring the quality of voice calls, based on metrics like ASR, ACD, and MOS scores.
Alerts when the Answer-Seizure Ratio falls below configured thresholds, indicating call completion issues.
Alarms generated by the Intrusion Detection System (IDS) when security policies or thresholds are breached.
Signals that a specific IDS policy rule has been triggered, indicating a potential security threat.
Describes the trap events related to the Intrusion Detection System, including threshold breaches and blacklist actions.
Reports when an IDS threshold is crossed for specific IP or IP+Port scopes, indicating potential malicious activity.
Notifies when performance metrics cross predefined thresholds, aiding in proactive monitoring and issue detection.
Indicates that the device has reinitialized, such as after a power failure, crash, or system reload.
Alerts when the SNMP agent receives a protocol message that is not properly authenticated.
To Next Page
