AudioCodes MSBR Series User Manual

CHAPTER2 SNMP Trap Alarms
MSBR | SNMP Alarms
Alarm acOperationalStateChange
Cleared Operational state
changed to
enabled
- -
Remote Monitoring Alarm
Table 2-20: acRemoteMonitoringAlarm
Alarm acRemoteMonitoringAlarm
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.145
Description The alarm is sent when the device loses connection with the remote
monitoring server (configured on the device as a Remote Web Service) for
remote monitoring of the device when it is located behind a NAT.
Default
Severity
Warning
Source
Varbind Text
Board#1
Event Type communicationsAlarm
Probable
Cause
callEstablishmentError
Alarm
Severity
Condition Text Corrective Action
Warning The device receives an HTTP
failure response
(4xx/5xx/6xx) when it sends
the monitoring report.
"No connection
with Remote
Monitoring server"
Check that the
configuration of
the Remote Web
Service is correct.
Cleared The device receives an HTTP
successful response (2xx)
when it sends the
monitoring report.
- -
- 30 -

AudioCodes MSBR Series Specifications

General

Brand	AudioCodes
Model	MSBR Series
Category	Security System
Language	English