AudioCodes MSBR Series - Call Resources Alarm

CHAPTER2 SNMP Trap Alarms
MSBR | SNMP Alarms
Alarm acSWUpgradeAlarm
Severity
Alarms
Source
System#0
Event Type processingErrorAlarm
Probable
Cause
softwareProgramError
Severity Condition Text Corrective Action
Major Software
upgrade
errors
"SW upgrade error: Firmware burning
failed. Startup system from
BootP/TFTP."
Start up the
system from
BootP/TFTP.
Call Resources Alarm
Table 2-14: acBoardCallResourcesAlarm
Alarm acBoardCallResourcesAlarm
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.8
Description The alarm is sent when no free channels are available.
Note: To enable this alarm, the Remote Alarm Indication (RAI) mechanism
must be activated, by configuring the [EnableRAI] parameter to [1].
Default
Severity
Major
Event Type processingErrorAlarm
Probable
Cause
softwareError (46)
Severity Condition Text Corrective Action
Major Percentage of busy
channels exceeds the
predefined RAI high
threshold
"Call resources
alarm"
Do one of the
following:
■ Expand system
capacity by
adding more
channels (trunks)
- 21 -