AudioCodes MSBR Series User Manual

CHAPTER2 SNMP Trap Alarms
MSBR | SNMP Alarms
Alarm acNTPServerStatusAlarm
of no connection to NTP server) may result with functionality
degradation and failure in device. If the device receives no response
from the NTP server, it polls the NTP server for 10 minutes for a
response. If there is still no response after this duration, the device
declares the NTP server as unavailable, by sending this alarm. The
failed response could be due to incorrect configuration.
Default Severity Major
Event Type communicationsAlarm
Probable Cause communicationsSubsystemFailure
Severity Condition Text Corrective Action
Major No initial
communication to
Network Time
Protocol (NTP) server.
"NTP server
alarm. No
connection to
NTP server."
Repair NTP
communication (the
NTP server is down or
its IP address is
configured incorrectly
in the device).
Minor No communication to
NTP server after the
time was already set
once.
- -
Ethernet Link Alarm
Table 2-29: acBoardEthernetLinkAlarm
Alarm acBoardEthernetLinkAlarm
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.10
Description The alarm is sent when an Ethernet link(s) is down. The alarm is
sent regardless of the number of ports configured in an Ethernet
Group; as soon as an Ethernet port (link) goes down, the alarm is
sent.
Default Severity Critical
Source Varbind Text Board#<n>/EthernetLink#0 (where n is the slot number)
This trap relates to the Ethernet Link Module (the #0 numbering
doesn't apply to the physical Ethernet link).
- 42 -

AudioCodes MSBR Series Specifications

General

Brand	AudioCodes
Model	MSBR Series
Category	Security System
Language	English