AudioCodes MSBR Series User Manual

CHAPTER2 SNMP Trap Alarms
MSBR | SNMP Alarms
Track ID Alarm
Table 2-34: acTrackIdStateChangeAlarm
Alarm acTrackIdStateChangeAlarm
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.121
Description The alarm is sent when a Track ID goes down or up (i.e., the destination of
the Track ID is no longer reachable). The alarm includes the Track ID,
interface name, destination address and the new track state. To configure
the tracking feature, use the track command.
Default
Severity
Minor
Source
Varbind Text
System#0/TrackIdRule#<n> (where n is the Track ID number).
Event Type communicationsAlarm
Probable
Cause
outOfService (71)
Severity Condition Text Corrective Action
Minor Track ID
changes
from "UP"
state to
"DOWN".
"Track ID 1 on
source
interface
<name> for
tracked
destination
<address> is
down"
If the problem is with the destination
device or with some network element
along the path, you need to resolve the
problem on the point of failure (not on
the MSBR device). If the problem is on
the MSBR device, for example, the
source interface used by the Track is
down, you need to resolve the problem
(by reconnecting a network cable,
reconfiguring a removed interface from
configuration, etc.)
Cleared Track ID
changes
from
"DOWN" to
"UP".
" Track ID 1
on source
interface
<name> for
tracked
destination
<address> is
up"
--
- 46 -

AudioCodes MSBR Series Specifications

General

Brand	AudioCodes
Model	MSBR Series
Category	Security System
Language	English