AudioCodes MSBR Series User Manual

CHAPTER2 SNMP Trap Alarms
MSBR | SNMP Alarms
No Route to IP Group Alarm
Table 2-45: acIpGroupNoRouteAlarm
Alarm acIpGroupNoRouteAlarm
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.114
Description The alarm is sent when the device rejects calls to the destination IP
Group due to any of the following reasons:
■ Server-type IP Group is not associated with a Proxy Set, or it's
associated with a Proxy Set that is not configured with any
addresses, or the associated Proxy Set experiences a proxy keep-
alive failure (Gateway and SBC)
■ Poor Voice Quality - MOS (SBC only)
■ Bandwidth threshold has been crossed (SBC only)
■ ASR threshold has been crossed (SBC only)
■ ACD threshold has been crossed (SBC only)
■ NER threshold has been crossed (SBC only)
Source Varbind
Text
The object for which the threshold is crossed according to one of the
above-mentioned reasons. The text displayed for this alarm can be one
of the following:
■ "No Working Proxy" (acProxyConnectivity trap is sent)
■ "Poor Quality of Experience"
■ "Bandwidth"
■ "ASR" (see acASRThresholdAlarm)
■ "ACD" (see acACDThresholdAlarm)
■ "NER" (see acNERThresholdAlarm)
Alarm Text <Alarm Description Reason> as described above.
Event Type Quality Of Service Alarm
Probable Cause One of the reasons described above.
Severity Condition Text
Corrective
Action
Major When calls rejected to IP Group
due to any of the above-
"IP Group is
temporarily
-
- 55 -

AudioCodes MSBR Series Specifications

General

Brand	AudioCodes
Model	MSBR Series
Category	Security System
Language	English