1. Product Introduction
11
© Copyright Reserved Autonics Co., Ltd.
-|Transparent setting guide|-
1. Product Introduction
1.1 Features
● High speed and high accuracy by digital control using high speed CPU
● Various controls
- Phase control, feedback control (constant voltage/constant current/constant power)
- Zero crossing cycle control (xed/variable cycles)
- Zero crossing ON/OFF control
● Improved maintainability with built-in fast-acting fuse and easy fuse replacement
● Communication output model: RS485 (Modbus RTU)
● Various control inputs and DI inputs
- control input: analog (current, voltage), ON/OFF (voltage pulse, no voltage), communication (RS485),
potentiometer
- DI input: AUTO/MAN switching, RUN/STOP switching, Reset, output holding, SP designation (6 set-
ting points can be customized)
● Various alarm output
- Overcurrent, overvoltage, fuse break, heat sink overheat, device fault, heater break alarm (partial
heater break detection)
● Improved convenience by separating operation part
● Applicable load
- Supercantal, platinum, molybdenum, carbon, halogen lamps, chrome, nickel, etc.
To Next Page
Loading...
Need help?
General
