Autronica Autroprime 2 - Page 91

Unit Configuration
Configuration Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME2-CONFIG/EGB, Rev. A, 2013-04-03,
Autronica Fire and Security AS
Page 91
5.13.4.4 Send Test Event
This command is used for test purposes.
From the External Interfaces Menu (5.13.1), perform the
following:
 Use the arrow down button to select ESPA, then press Enter.
 Use the arrow down button to select Send Test Event, then press
Enter.
 The following message will appear:
 “Text Message Transmitted”.
o A text message is transmitted to verify that there is a proper
communication between Autroprime and the paging system.
