Power Consumption
asafeinstall_dgb, AutroSafe Interactive Fire Detection System, Release 4,
116-P-ASAFE-INSTALL/DGB, Doc-1004796-2, 2021-08-23, Autronica Fire and Security AS
Page 33
7.4 Phoenix Ethernet Switches
A network solution (AutroNet) with more than two panels requires the
use of switches, unless AutroNet Ring Topology is used (refer to
chapter 10.6.3). Only Phoenix Ethernet switches are approved and
supported by Autronica Fire and Security AS. The switch type and the
number of switches depend on the actual installation / network design
(number of panels and the transmission length between the panels /
switches).
For detailed technical information on the power consumption for
Phoenix Ethernet Switches, refer to System Description, AutroSafe
Interactive Fire Detection System.
To Next Page
Loading...
Need help?
General
