Connecting Internal Cables
asafeinstall_dgb, AutroSafe Interactive Fire Detection System, Release 4,
116-P-ASAFE-INSTALL/DGB, Doc-1004796-2, 2021-08-23, Autronica Fire and Security AS
Page 36
9.2 BS-420 / BC-420
9.2.1 AL_Com+ Connection on Controller Board BSA-400
9.2.2 AL_Com+ Connection on Communication Module BSL-310
9.2.3 Multifunction Serial Port Connection on Controller Board BSA-400
A ribbon cable is connected between the Multifunction Serial Port
Connector and the main terminal block (mounted on the DIN rail inside
the cabinet).
To Next Page
Loading...
