Installing I/O Modules
asafeinstall_dgb, AutroSafe Interactive Fire Detection System, Release 4,
116-P-ASAFE-INSTALL/DGB, Doc-1004796-2, 2021-08-23, Autronica Fire and Security AS
Page 51
11. Installing I/O Modules
11.1 Introduction
This chapter provides information on the mounting and removal of I/O
modules.
Note that the internal Power Module (BSS-310A) and the
Communication Module (BSL-310) are already mounted in a fixed
position when the product leaves the factory.
11.2 Front View of I/O Module
To Next Page
Loading...
