Autronica AutroSafe User Manual

Service and Maintenance
asafeinstall_dgb, AutroSafe Interactive Fire Detection System, Release 4,
116-P-ASAFE-INSTALL/DGB, Doc-1004796-2, 2021-08-23, Autronica Fire and Security AS
Page 63
14.7 Safety Measures during Commissioning and
Maintenance
NOTE
To avoid unmotivated activation of release outputs on connected safety-
critical systems, it is important that service personnel physically
disconnects or disables (in the Service Menu) the safety-critical system
from the fire detection system during commissioning and maintenance.
14.8 SIL2 Approved Systems
For SIL2 approved systems, service and maintenance shall be carried
out according to the proof test intervals stated on the AutroSafe 4
Oil&Gas SIL2 (G2) certificate with registration number 44 207 11
555929-001.
14.9 Contact Information Local Service Representative
Country
Name of local service
representative
Address
Telephone number

Autronica AutroSafe Specifications

General

Brand	Autronica
Model	AutroSafe
Category	Measuring Instruments
Language	English