If you have a headset attached, you can change the phone's behavior so that the audio is played
through the headset by default rather than the speaker.
Procedure
1. Press the button.
2. Use the cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Audio path.
4. Use the left and right cursor keys to switch between Headset or Speaker.
5. When completed, press Save or Done.
6. Press Back/Exit to exit the menus.
Related links
Headset Operation on page 114
Headset Operation
March 2023 Using 1408/1416 Phones on IP Office 116
Comments on this document? infodev@avaya.com
To Next Page
Loading...
