Collecting IP stations data
Procedure
1. At the SAT, enter list media-gateway to display a list of administered
gateways.
2. Look for supported gateways in the Type field.
3. Enter display media-gateway.
4. Read the reported IP address for this gateway.
5. Enter list node-name and compare the IP address of the Branch Gateway in
the list with the IP address of the gateway that you are administering for SLS.
When you find a match in the node-name screen, read the assigned node-name.
This will be used to do a pattern match with a field on the IP Station screen in Step
6 on page 0 .
6. Enter list station type type, where type is one of the supported IP
stations.
The report lists all IP phones that could have the Survivable GK Node-Name
administered to the target media gateway. The Survivable GK Node-Name
uniquely associates an IP phone with a particular Branch Gateway.
7. Once a match is made between the station screen's Survivable GK Node-Name
and the target gateway's Node-Name , gather the values for the given IP station
per:
• Extension
• Security Code
(IP only) - used for the registration of the IP endpoint
• Type — as any of the following types:
- 4601
- 4602
- 4602SW
- 4606
- 4610SW
- 4612
- 4620
- 4620SW
- 4621
Standard Local Survivability (SLS)
Administering Avaya G430 Branch Gateway October 2013 143
To Next Page
Loading...
