- 4622
- 4624
- 4625
• Survivable COR
• Survivable Trunk Dest
• Expansion Module
• Name
For more information about these fields, see
Station screen field descriptions for
Media Gateway on page 124.
Collecting trunk groups data
Procedure
1. At the SAT, enter list media-gateway to display a list of administered
gateways.
2. Look for supported gateways in the Type field.
3. At the SAT, enter display media gateway to view the media modules that are
assigned to the various slots.
Use the table in SLS group type assignments on page 182 as a reference to identify
how the particular media module has been configured for serving as a trunk port,
and then use the various list commands on Communication Manager to look for
physical port matches in the various trunk SAT forms in order to discover what
translation information is needed.
4. Identify the analog trunk ports.
Refer to
Module-port values in SLS trunk-group context for analog trunks on
page 183.
5. Identify the BRI trunk ports.
Refer to Trunk port values in SLS trunk-group context for digital trunks on
page 183.
6. Identify the digital DS1 trunk ports.
Refer to
Trunk port values in SLS trunk-group context for digital trunks on
page 183.
7. Identify the Branch Gateway modules and check for provisioned trunk ports.
8. At the SAT, enter display port portid, where portid is the trunks port on the target
gateway.
Standard Local Survivability (SLS)
144 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com
To Next Page
Loading...
