Procedure
1. At the SAT, enter display inc-call-handling-trmt trunk-group n,
where n is an administered trunk group.
2. For each entry, read the values of the following fields:
• Called Number
• Called Len
• Del
• Insert
Incoming call handling data field descriptions
Related topics:
Called Number on page 162
Called Len on page 162
Del on page 163
Insert on page 163
Called Number
Valid Entry Usage
1 to 16 The number of leading digits received for an incoming call.
blank Used as a “wildcard”, so that any number associated with the specified
service or feature can match in this field.
Called Len
Valid Entry Usage
0 to 21 The number of digits received for an incoming call. Zero is used when
the Public Switched Telephone Network (PSTN) provider does not
provide any “Number Digits” within the received Called Party IE, such
as in Japan.
blank When Called Number has also been set to blank, so that any length of
digits associated with the Called Party IE of the Incoming SETUP
message matches this field.
Standard Local Survivability (SLS)
162 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com
To Next Page
Loading...
