Avaya G430 - Page 188

Root Level
Commands
First Level Context
Commands
Second Level
Context
Commands
Description
show sls Display SLS status:
enabled or disabled
sls Enter the sls context
bri Administer an ISDN Basic
Rate Interface (BRI) port
for SLS
set bearer-
capability
Set the Information
Transfer Rate field of the
Bearer Capability IE in SLS
set country-
protocol
Specify the ISDN Layer 3
country protocol type in
SLS
set
directory-
number-a
Assign a directory number
to the B1 channel of the
BRI interface in SLS
set
directory-
number-b
Assign a directory number
to the B2 channel of the
BRI interface in SLS
set endpoint-
init
Determine whether or not
the far-end supports
endpoint initialization in
SLS
set interface Specify the glare-handling
convention for a BRI link in
SLS
set
interface-
companding
Set the interface to agree
with the companding
method used by the far-end
of the DS1 circuit for SLS
mode
set layer1-
stable
Determine whether or not
to keep the physical layer
active (stable) between
calls in SLS
set name Identify the user name for
an ISDN facility in SLS
set side Specify the glare-handling
conditions when the set
interface command has
Standard Local Survivability (SLS)
188 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com