Command Description
set lldp tx-interval Set the TxInterval, the interval at which the
device transmits LLDP frames
set port lldp Change the administrative LLDP status of a port
set port lldp tlv Enable or disable the transmission of the optional
TLVs on a per port basis
show lldp Display the LLDP information received on each port
show lldp config Display the global LLDP configuration
show port lldp config Display port-level LLDP configuration
show port lldp vlan-
name config
Show the VLANs that are being transmitted on a
specific port
Switch Ethernet port configuration
Administering Avaya G430 Branch Gateway October 2013 213
To Next Page
Loading...
