Avaya G430 - Page 219

Displaying the status of the Syslog server
Procedure
Enter show logging server condition followed by the IP address of the Syslog
server.
If you do not specify an IP address, the command displays the status of all Syslog
servers defined for the Branch Gateway.
Example
As the following example illustrates, the command displays whether the server is enabled or
disabled, and lists all filters defined on the server:
Gxxx-001(super)# show logging server condition 147.2.3.66
******************************************************
*** Message logging configuration of SYSLOG sink ***
Sink Is Enabled
Sink default severity: Warning
Server name: 147.2.3.66
Server facility: auth
Server access level: read-only
Syslog sink default settings
Severity: Warning
Facility: Local 7
Access level: Read-write
Syslog message format
Syslog messages are arranged chronologically and have the following format:
<34> Oct 11 22:14:15 host LINKDOWN [005ms, SWICHFABRIC-Notification:Port 10/3 Link,
ID=1234567890
System logging
Administering Avaya G430 Branch Gateway October 2013 219