Avaya G430 - Page 222

mediagateway.g430 | 0 BOOT MESSAGE[BOOT-Informational: Booting from
bank B with firmware version 29.22.50, ID=N/A
<190>Apr 21 14:30:25 149.49.77.11 -NoTag: -NoUTC 2009 965 1
mediagateway.g430 | 0 coldStart[BOOT-Informational: System boot up
from cold reset, ID=N/A
<187>Apr 21 14:30:25 149.49.77.11 -NoTag: -NoUTC 2009 425 1
mediagateway.g430 | 0 MSY-TRPMAJNA[VOICE-Error: No Call Controller
Found, ID=N/A
Example display of conditions defined for the file output sink
The following example shows the output from the show logging file condition
command.
Example
Gxxx-001
(super)# show logging file condition
******************************************************
*** Message logging configuration of FILE sink ***
Sink Is Enabled
Sink default severity: Informational
Log file message format
Log file messages appear in first-in, last-out order. They have the following format:
01/18/2005,10:55:09:CLI-Notification: root: set port disable 10/6
01/18/2005,10:49:03:SWITCHFABRIC-Notification: Port Connection Lost on Module 10
port 5
Each message provides the following information:
• Severity
• The date and time (if available)
• The logging application
• The process ID (if available)
• The UTC offset (if available)
• The year
• Milliseconds
• Log format
• The severity level
• The Branch Gateway type
• The message text
System logging
222 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com