Avaya G430 - Page 241

Related topics:
Commands used to configure RTCP QoS parameters on page 241
Commands used to configure RSVP parameters on page 241
Summary of QoS, RSVP, and RTCP configuration CLI commands on page 241
Commands used to configure RTCP QoS parameters
Use the following commands to set the RTCP QoS parameters.
• set qos rtcp.
•
show qos-rtcp
Avaya Branch Gateways G250 and G350 CLI Reference
For more information about these commands, see Summary of QoS, RSVP, and RTCP
configuration CLI commands on page 241, or the
Avaya Branch Gateway G430 CLI Reference
Avaya Branch Gateway G450 CLI Reference
Commands used to configure RSVP parameters
VoIP can use the RSVP protocol to reserve network resources for voice data while
communicating with other Gateways and other VoIP entities, such as, IP phones and
Softphones.
•
set qos rsvp
•
show qos-rtcp
Avaya Branch Gateways G250 and G350 CLI Reference
For more information about these commands, see
Summary of QoS, RSVP, and RTCP
configuration CLI commands on page 241, or
Avaya Branch Gateway G430 CLI Reference
Avaya Branch Gateway G450 CLI Reference
Summary of QoS, RSVP, and RTCP configuration CLI commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
VoIP QoS
Administering Avaya G430 Branch Gateway October 2013 241