Avaya G430 - Page 311

• rmon. RMON rising/falling alarm
• dhcp server. DHCP server error, such as a DHCP IP conflict detection or notification
of no IP address left for specific network
• dhcp-clients. DHCP client error, such as a DHCP client conflict detection
• rtp-stat-faults. RTP statistics: QoS fault/clear traps
• rtp-stat-qos. RTP statistics: end-of-call QoS traps
• wan. WAN router traps
• media-gateway. Branch Gateway traps (equivalent to G700 MGP traps)
• security. Security traps, such as unAuthAccess, macSecurity, unknownHostCopy, and
accountLockout
• config. Configuration change notifications
• eth-port-faults. Ethernet port fault notifications
• sw-redundancy. Software redundancy notifications
• temperature. Temperature warning notifications
• cam-change. Changes in CAM notifications
• 13-events. Duplicate IP, VLAN violations
• policy. Policy change notifications
• link-faults. ITC proprietary link down notifications
• supply. Main and backup power supply notifications
Summary of SNMP trap configuration commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Root level command
Command Description
interface (dialer|
fastethernet| tunnel|
usb-modem)
Enter the context of the Dialer, Fast
Ethernet, Tunnel, or USB-modem
interface
snmp trap link-
status
Enable or disable Link Up and Link
Down traps on an interface
SNMP
Administering Avaya G430 Branch Gateway October 2013 311