Avaya G430 - Page 344

sent even when the port is disabled. This feature is particularly useful for the port redundancy
application, where you need to be informed about a link failure on the dormant port.
Related topics:
Port classification configuration examples on page 344
Summary of port classification commands on page 344
Port classification configuration examples
The following example classifies a port as a valuable port:
Gxxx-001(super)# set port classification 10/5 valuable
Port 10/5 classification has been changed.
The following example displays the port classification of all ports:
G430-001(super)# show port classification
Port Port Classification
-------- -------------------------
10/3 valuable
10/4 regular
Summary of port classification commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Command Description
set port
classification
Set the port classification to either regular or valuable
(any change in the spanning tree state from forwarding
for a valuable port will erase all learned MAC addresses
in the switch)
show port
classification
Display port classification for a specified port or all ports
Advanced switching
344 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com