Avaya G430 - Page 354

Resetting the RTP statistics application
Procedure
Enter rtp-stat clear.
All counters are reset and the RTP statistics history is erased.
Viewing application configuration
Viewing the application configuration helps you see if the application is enabled, which types
of traps are enabled, and how the trap rate limiter and minimum statistics window are
configured. The minimum statistics window is the minimum number of observed RTP sequence
increments for which the application evaluates packet loss.
Enter show rtp-stat config. For example:
Gxxx-001(super)# show rtp-stat config
RTP Statistic: Enabled
QoS Trap: Enabled
QoS Fault Trap: Enabled
Fault: 2
Clear: 0
QoS Trap Rate Limiter:
Token Interval: 10.00 seconds
Bucket Size: 5
Session Table:
Size: 128
Reserved: 64
Min Stat Win: 50
Related topics:
RTP statistics application output field descriptions on page 354
RTP statistics application output field descriptions
Name
Description
RTP Statistic Status of the RTP statistics application. Possible values:
• Enabled. The application is enabled.
• Disabled. The application is disabled.
QoS Trap QoS trap status. Possible values:
• Enabled. The RTP statistics application is configured to generate
QoS traps.
• Disabled. The RTP statistics application is not configured to
generate QoS traps.
Monitoring applications
354 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com