Avaya G430 - Page 418

Procedure
1. Enter analog-test to enter the analog-test context.
2. Use the show correction command to display the balance, receive-gain, and
transmit-gain corrections applied to each port.
Summary of integrated analog testing commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Root Level
Commands
First level
command
Second level command Description
analog-
test
Enter the analog-test
context
cancel Abort an analog test if it is
already running
clear
profile
Delete a test profile
launch Launch a specific test
profile Enter the analog-test-
profile context to setup or
edit a test profile
set crosstalk-
destination
Set the Local Exchange
Carrier number
destination of the call from
the crosstalk port
set crosstalk-
port
Specify the crosstalk port
set crosstalk-
responder
Specify the responder port
for the crosstalk port
set destination Set the Local Exchange
Carrier number
destination of the
measurement call
set port Specify the port to test
Monitoring applications
418 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com