Avaya G430 - Page 453

Gxxx-001(super-DHCP 2/option 176)# exit
Gxxx-001(super-DHCP 2)# exit
Gxxx-001(super)# ip dhcp activate pool 2
Done!
Gxxx-001(super)# ip dhcp-server
Done!
Gxxx-001(super)#
The following example configures a vendor-specific option for DHCP pool 5:
Gxxx-001(super-DHCP 5)# vendor-specific-option 1
Gxxx-001(super-DHCP 5/vendor specific 1)# class-identifier“ccp.avaya.com”
Done!
Gxxx-001(super-DHCP 5/vendor specific 1)# value raw ascii “gfdgfd”
Done!
Gxxx-001(super-DHCP 5/vendor specific 1)# exit
Gxxx-001(super-DHCP 5)#
The following example defines a reservation pool for data devices:
Gxxx-001(super)# ip dhcp pool 3
Gxxx-001(super-DHCP 3)# name “Data 1 Server”
Done!
Gxxx-001(super-DHCP 3)# start-ip-addr 135.64.20.61
Done!
Gxxx-001(super-DHCP 3)# end-ip-addr 135.64.20.61
Done!
Gxxx-001(super-DHCP 3)# subnet-mask 27
Done!
Gxxx-001(super-DHCP 3)# client identifier 01:11:22:33:44:55:66
Done!
Gxxx-001(super-DHCP 3)# default-router 135.64.20.33
Done!
Gxxx-001(super-DHCP 3)# dns-server 10.10.1.1
Done!
Gxxx-001(super-DHCP 3)# exit
Gxxx-001(super)# ip dhcp activate pool 3
Done!
Gxxx-001(super)#
Commands for displaying DHCP server information
•
show ip dhcp-pool
•
show ip dhcp-server bindings
•
show ip dhcp-server statistics
For more information about these commands, see
Summary of DHCP Server commands on
page 454 or the Avaya Branch Gateway G430 CLI Reference.
The router
Administering Avaya G430 Branch Gateway October 2013 453