Avaya G430 - Page 454

Summary of DHCP Server commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Root level
command
First level
command
Second level
command
Description
clear ip
dhcp-server
binding
Delete IP address binding
clear ip
dhcp-server
statistics
Clear the statistics of the
DHCP server
ip dhcp
activate
pool
Activate configured DHCP
pools
ip dhcp ping
packets
Enable the sending of a ping
packet by the DHCP server to
check if the IP address it is
about to allocate is already in
use by another client
ip dhcp ping
timeout
Set the time the DHCP server
waits for a reply to a sent ping
packet before allocating an IP
address to a DHCP client
ip dhcp pool Create a DHCP pool
bootfile Provide startup parameters
for the DHCP client device
client-
identifier
Reserve the pool’s IP address
for assignment to a specific
client
default-
router
Set up to eight default router
IP addresses in order of
preference
dns-server Set up to eight Domain Name
Server (DNS) IP addresses
domain-name Set a domain name string for
the client
The router
454 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com