Avaya G430 - Page 563

Policy list attributes
Command Description
name Defines a list name (text string). The default value is
owner.
owner Defines a list owner (text string). The default value is list#
<listnumber>.
cookie Defines a list cookie (integer). The Avaya QoS Manager
uses the cookie attribute internally. Normally, you should
not change this attribute.
show list View the attributes.
Default actions
When no rule matches a packet, the Branch Gateway applies the default action for the list.
The following table shows the default action for each type of policy list:
List
Default action
Access control list Accept all packets
QoS list No change to the priority or DSCP
Deleting a policy list
Procedure
To delete a list, enter one of the following commands:
• To delete an access control list, enter no ip access-control-list followed
by the number of the list you want to delete.
• To delete a QoS list, enter no ip qos-list followed by the number of the list
you want to delete.
Policy lists
Administering Avaya G430 Branch Gateway October 2013 563