When you use the copy file usb command to upload a specific file from the gateway to the
USB mass storage device, file can be any of the following types:
• announcement-file. Announcements files
• auth-file. Authentication file
• phone-scriptA. Phone script bank A in the Branch Gateway’s TFTP directory
• phone-scriptB. Phone script bank B in the Branch Gateway’s TFTP directory
• startup-config. The startup configuration file
• capture-file. The packet sniffing buffer
• dhcp-binding. The DHCP binding file
• syslog-file. The syslog file
• cdr-file. A Call Detail Recording (CDR) file
Files copied to an FTP/SCP/TFTP server
When you use the copy file ftp command to upload a specific file from the Branch Gateway
to an FTP server, file can be any of the following types:
• announcement-file. Announcements files
• auth-file. Authentication file
• capture-file. The packet sniffing buffer
• cdr-file. A Call Detail Recording (CDR) file
• dhcp-binding. The DHCP binding file
When you use the copy file scp command to upload a specific file from the Branch Gateway
to an SCP server, where file can be any of the following:
• announcement-file. Announcements files
• auth-file. Authentication file
• capture-file. The packet sniffing buffer
• cdr-file. A Call Detail Recording (CDR) file
• dhcp-binding. The DHCP binding file
When you use the copy file tftp command to upload a specific file from the G ateway to
a TFTP server, where file can be any of the following:
• announcement-file. Announcements files
• capture-file. The packet sniffing buffer
• auth-file. Authentication file
• capture-file. The packet sniffing buffer
Basic device configuration
88 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com
To Next Page
